Boiler filling
3 posters
Page 1 of 1
Boiler filling
I've just bought a secondhand 2" Burrell and I can't work out how to fill the boiler initially. Obviously it has the pump and injector for filling under pressure but what about the first time, is there a convenient filling point?
Jamesd- Number of posts : 5
Location : South Wales
Registration date : 2016-09-18
Re: Boiler filling
You should have a "bung" in the smokebox.
Also an option I use often. adaptor on the blowdown valve and put a hose on it to fill from the bottom.
Also an option I use often. adaptor on the blowdown valve and put a hose on it to fill from the bottom.
lynnr- Number of posts : 3242
Age : 55
Location : Highland, 4inch showman
Registration date : 2010-08-06
Re: Boiler filling
Blow down valve everytime on my 4" with a little submersible pump, although with a 2" its not going to take much water so an electric pump might be a bit much.
I filled a 3" the other day for a fellow chap on the rally field and it took seconds with my pump and just a few pints, where as the 4" gobbles 5 gallons with ease.
I filled a 3" the other day for a fellow chap on the rally field and it took seconds with my pump and just a few pints, where as the 4" gobbles 5 gallons with ease.
LiveSteam- Number of posts : 778
Location : Hampshire
Registration date : 2013-09-08
Re: Boiler filling
Thanks both. When you say blowdown do you mean the small pipe on the gauge glass?
Jamesd- Number of posts : 5
Location : South Wales
Registration date : 2016-09-18
Re: Boiler filling
One down the side of the horn plate at the foundation ring.
lynnr- Number of posts : 3242
Age : 55
Location : Highland, 4inch showman
Registration date : 2010-08-06
Re: Boiler filling
I've nicked Its-me's picture and highlighted the bit on the boiler, you'll find a valve and outlet just there.
Hope that helps
Hope that helps
LiveSteam- Number of posts : 778
Location : Hampshire
Registration date : 2013-09-08
Re: Boiler filling
Extremely helpful, thank you.
Jamesd- Number of posts : 5
Location : South Wales
Registration date : 2016-09-18
Similar topics
» Filling boiler
» Filling boiler
» filling up?
» im from australia and need to know if the boiler needed to be change to suit aussie boiler code
» Boiler dimensions & Boiler tips
» Filling boiler
» filling up?
» im from australia and need to know if the boiler needed to be change to suit aussie boiler code
» Boiler dimensions & Boiler tips
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
|
|