My Burrell Build.

Ok starting my story again, for some reason my first topic has disapeared.

Kit one part complete.

Looks like it is going well, hope you are enjoying the build

This seems like such a long time ago now but I loved making the fronts. The blokes where I work were in awe once the kit was together. Looking good!

Hi all...kit 2 has arrived. One quick question....the axle collars BU20202-2 they seem to have a curve on one side and not on the other. ....does this curve face in over or out over when placed onto the axle ?. The instructions don't give guidance on this. They seem to fit well when placed with the curve in over. Help please !!!.

I found that mine fitted flush with the curved side against the axle. If you fit them temporary, you will find that if you fit them the wrong way around, they will shorten the axle stub, and you will not get the retaining collar for the wheels on far enough to get the retaining pins through. Either way, it would pay to test fit the wherls etc with the retaining collars and pins.
         Mike

These are my collars fitted and the pins dropped in with no hassle. Hope this helps. Apologies for the dusty axle and fronts they have been sat redundant for a while.

Wonderful picture pitpup. 
Please keep Posting your photos.
Phil.

Don't know why but the pics always load on the side lol.

Does that ever look sharp!!!!

Excellent indeed.