Black gloss paint
4 posters
Page 1 of 1
Black gloss paint
I spoke to phoenix paints at the show today they say thier gloss paint is ok for the smoke box and chimney e.c.t and wont burn off is this true or should i go for a 240 or 500 degree gloss from craftmaster or other manufacture. Also what about the fire box and boiler. Suggestions would be helpful as i dont want it burning off on my first steam.
Keith
Keith
Re: Black gloss paint
WE WERE TOLD THIS BY ONE OF THEIR 'STAFF' SOMETIME AGO, BUT WHEN I QUESTIONED CHRIS (THE BOSS) HE WAS NOT SO SURE. SO WE WENT FOR THE SMOKEBOX BLACK (SATIN) THAT REEVES DO. WILL SAY THAT IT GOES ON NICE, LOOKS GOOD, BUT AS YET WE'VE NOT 'SET FIRE' TO IT. JUST USED THE CRAFTMAN MATT HI-TEMP 300 ON OUR BOILER, AGAIN GOES ON NICE, BUT DOES NOT SEEM TO ADHERE AS WELL, DESPITE BEING ASSURED THAT IT DOES.
YOU PAYS YA MONEY, YA TAKES YA CHOICE !
REGARDS
BRUCE
YOU PAYS YA MONEY, YA TAKES YA CHOICE !
REGARDS
BRUCE
BUNGLE- Number of posts : 232
Age : 65
Location : HERTS (2" BURRELL)
Registration date : 2008-06-17
Re: Black gloss paint
Hi, just out of curiosity where can one buy the CRAFTMAN MATT HI-TEMP 300 range of paints, I have Googled it without luck.
Ian
Ian
Vapor- Number of posts : 383
Age : 113
Location : Isle of Wight (2" Burrell & 5" Duchess ex MW)
Registration date : 2008-06-18
BOILER PAINT
If you mean Craftmaster Paints, these can be bought from Heritage Steam Supplies (www.heritagesteamsupplies.co.uk) and many other suppliers.
gulfstream- Number of posts : 34
Location : LEICESTERSHIRE (FODEN)
Registration date : 2008-06-15
Re: Black gloss paint
That will be the reason I cant find Craftman paints, the funny thing is everybody on this forum refers to the paint as Craftman not Craftmaster.
Many Thanks
Many Thanks
Vapor- Number of posts : 383
Age : 113
Location : Isle of Wight (2" Burrell & 5" Duchess ex MW)
Registration date : 2008-06-18
Re: Black gloss paint
HI VAPOR, YES INDEED IT IS REALLY CALLED CRAFTMASTER, NOT CRAFTMAN . THE PHONE NUMBER IS 01384 485554, IF YOU WOULD LIKE TO SPEAK TO THEM, RATHER THAN E-MAIL.
THEY NORMALLY HAVE A FULL OR HALF PAGE AD IN OLD GLORY (IF YOU READ FULL SIZE STEAM MAGS - NEVER SEEN THEM ADVERTISE IN THE MODEL MAGS)
REGARDS
BRUCE
THEY NORMALLY HAVE A FULL OR HALF PAGE AD IN OLD GLORY (IF YOU READ FULL SIZE STEAM MAGS - NEVER SEEN THEM ADVERTISE IN THE MODEL MAGS)
REGARDS
BRUCE
BUNGLE- Number of posts : 232
Age : 65
Location : HERTS (2" BURRELL)
Registration date : 2008-06-17
Re: Black gloss paint
I have just sprayed smoke box and chimney with Halfords High Temperature Engine Enamel paint it has been specially formulated to withstand temperatures of up to 450°C. it went on really well with a good finish, only time will tell.
Similar topics
» kit 3
» Copper Boiler Painting
» What black paint for the boiler & Cylinder Block?
» Rear wheel
» What Paint and who from
» Copper Boiler Painting
» What black paint for the boiler & Cylinder Block?
» Rear wheel
» What Paint and who from
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
|
|