2 inch Burrell boilers
2 posters
Page 1 of 1
2 inch Burrell boilers
as we build up the the stock of 2 inch burrells we also need to make enough boilers to cover that stock. we tend to make these in batches of ten at the moment and we squeeze them in between the larger boilers. i thought this would give you a good opportunity to see some of the sub-assemblies being prepared.
the holes in the boiler barrel are machined on the CNC 4th axis before the boiler is assembled, here you can see the blank tube loaded in the machine...
and after the holes have been drilled...
there are loads of sub-assemblies prepared and ready, hopefully i'll get some more photos as and when they start to go together
craig
the holes in the boiler barrel are machined on the CNC 4th axis before the boiler is assembled, here you can see the blank tube loaded in the machine...
and after the holes have been drilled...
there are loads of sub-assemblies prepared and ready, hopefully i'll get some more photos as and when they start to go together
craig
miller- Number of posts : 270
Location : STW
Registration date : 2008-06-16
Re: 2 inch Burrell boilers
Thanks for the pics looks nice and I now see what is inside
hughb- Number of posts : 575
Age : 54
Location : hertfordshire
Registration date : 2009-03-13
Re: 2 inch Burrell boilers
another couple of photos of these boilers. they are now getting their "outer skins"...
Craig
Craig
miller- Number of posts : 270
Location : STW
Registration date : 2008-06-16
Similar topics
» 4"Burrell boilers
» general production update: june 2013
» 4"Burrell boilers
» July production
» 4" Burrell Boilers
» general production update: june 2013
» 4"Burrell boilers
» July production
» 4" Burrell Boilers
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
|
|