Motion Guard bolts
3 posters
Page 1 of 1
Motion Guard bolts
Hi,
In the process of fitting the motion guards I've got the M3 bolts and M3 CSK's mixed up, where do the 6 x CSK's go please?
Thanks, Chris
In the process of fitting the motion guards I've got the M3 bolts and M3 CSK's mixed up, where do the 6 x CSK's go please?
Thanks, Chris
CJRH- Number of posts : 14
Location : Bramley
Registration date : 2021-11-03
Re: Motion Guard bolts
Hi
The countersinks hold the beading on the front edge where the angle bracket fits to join to the cylinder
The countersinks hold the beading on the front edge where the angle bracket fits to join to the cylinder
_________________
Lynn
Technical Support
Steam Traction World Ltd
CJRH likes this post
Re: Motion Guard bolts
Hi Chris,
If I am not completely off two of the csk go at the RH motion guard at the rear end of the guard to mount the beading - a hex head would touch the hornplates there. Same for LH where you need 4 - two at the rear and two at the front next to the mounting bracket in the cylinder. Also you should be able to identify the correct position as the holes in the covers should be countersunk, if I remember correctly.
Hope this helps (and my memory is correct )
Cheers
Elwood
If I am not completely off two of the csk go at the RH motion guard at the rear end of the guard to mount the beading - a hex head would touch the hornplates there. Same for LH where you need 4 - two at the rear and two at the front next to the mounting bracket in the cylinder. Also you should be able to identify the correct position as the holes in the covers should be countersunk, if I remember correctly.
Hope this helps (and my memory is correct )
Cheers
Elwood
elwood-59- Number of posts : 300
Location : Germany-NRW
Registration date : 2014-12-17
CJRH likes this post
Similar topics
» Kit 13 m4 bolts
» New build of a Burrell
» Tone's Showmans second lot!
» Gear guard
» Gear guard modification
» New build of a Burrell
» Tone's Showmans second lot!
» Gear guard
» Gear guard modification
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
|
|