RH Rear Wheel drive bosses
2 posters
Page 1 of 1
RH Rear Wheel drive bosses
I have just trial fitted the bosses to the Inner Cover using the M6 csk screws and have noticed that the bosses are loose in the cover even though the screws are tight.
Am I correct to think that these should be tight against the Inner Cover and therefore the csk screws need shortening?
Also should the bosses be painted or left as bare metal?
Thanks
Martin
Am I correct to think that these should be tight against the Inner Cover and therefore the csk screws need shortening?
Also should the bosses be painted or left as bare metal?
Thanks
Martin
Parador2- Number of posts : 8
Location : NE LINCS
Registration date : 2016-04-27
Re: RH Rear Wheel drive bosses
Picture please then We can answer without guessing.
lynnr- Number of posts : 3242
Age : 55
Location : Highland, 4inch showman
Registration date : 2010-08-06
Similar topics
» Tip for assembling spokes for front wheel and rear wheel
» Drive pin fit in rear wheels on 2" Burrell
» IanL Road Loco
» DCC rear wheel
» KIT 4 (REAR WHEEL)
» Drive pin fit in rear wheels on 2" Burrell
» IanL Road Loco
» DCC rear wheel
» KIT 4 (REAR WHEEL)
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
|
|