lyka kits 2,3,4 etc etc etc...
2 posters
Page 1 of 1
lyka kits 2,3,4 etc etc etc...
after the slow start on the new run of Lykas we are working ahead to prevent any more delays. work has already started on kit 2 and 3 parts. material has arrived for the wheel hubs and i'll be sorting the material for kit 6 tomorrow as this has lots of welding to be done
miller- Number of posts : 270
Location : STW
Registration date : 2008-06-16
Re: lyka kits 2,3,4 etc etc etc...
lyka wheel hub parts...
and diff casings...
and diff casings...
miller- Number of posts : 270
Location : STW
Registration date : 2008-06-16
Re: lyka kits 2,3,4 etc etc etc...
more lyka work done. kit 2 is almost ready.
the hubs have been fitted together and drilled...
kit 3 diff halves have been bolted together and turned...
and then back on the mill for more drilling...
and material is now arriving for kit 6...
the hubs have been fitted together and drilled...
kit 3 diff halves have been bolted together and turned...
and then back on the mill for more drilling...
and material is now arriving for kit 6...
craig@STW- Number of posts : 1410
Location : location Location
Registration date : 2010-05-06
Re: lyka kits 2,3,4 etc etc etc...
kit 2 steering parts...
kit 3 differential gear blanks have been turned...
and are now on the gear cutter...
kit 6 body parts being prepped...
kit 3 differential gear blanks have been turned...
and are now on the gear cutter...
kit 6 body parts being prepped...
craig@STW- Number of posts : 1410
Location : location Location
Registration date : 2010-05-06
Re: lyka kits 2,3,4 etc etc etc...
lyka kit two was sent out this week and lyka kit three is in the boxes and sealed.
kit two, steering...
kit three, differential...
current stage of control model...
kit four hubs have now been powder coated, other kit four material is being ordered and we are still working on the very large kit six when we get the opportunity between other current production
craig
kit two, steering...
kit three, differential...
current stage of control model...
kit four hubs have now been powder coated, other kit four material is being ordered and we are still working on the very large kit six when we get the opportunity between other current production
craig
craig@STW- Number of posts : 1410
Location : location Location
Registration date : 2010-05-06
Re: lyka kits 2,3,4 etc etc etc...
almost finished drilling all the body sections ready for fabrication...
still working on kits 4, 5 and 6. 4 and 5 should be ready soon (if the completed wheels turn up).
then moving on to the next kit which is brakes
still working on kits 4, 5 and 6. 4 and 5 should be ready soon (if the completed wheels turn up).
then moving on to the next kit which is brakes
craig@STW- Number of posts : 1410
Location : location Location
Registration date : 2010-05-06
Re: lyka kits 2,3,4 etc etc etc...
brake disc mounts for kit 4...
craig@STW- Number of posts : 1410
Location : location Location
Registration date : 2010-05-06
Re: lyka kits 2,3,4 etc etc etc...
we got the wheels back this week so the next kit (rear wheels) is all ready to go. the front wheel kit is also ready to go and i believe you will be given the option to have both if you wish.
next month the spring kit and the body kit will be available. not actually sure how these are numbered anymore as originally the two sets of wheels were kit 4A and 4B but now they are kits 4 and 5 . the body kit was originally called kit 6 so im not sure where the springs will slot in, but they will be available.
here's the control model...
next month the spring kit and the body kit will be available. not actually sure how these are numbered anymore as originally the two sets of wheels were kit 4A and 4B but now they are kits 4 and 5 . the body kit was originally called kit 6 so im not sure where the springs will slot in, but they will be available.
here's the control model...
craig@STW- Number of posts : 1410
Location : location Location
Registration date : 2010-05-06
Re: lyka kits 2,3,4 etc etc etc...
the front wheels kit has been boxed up and includes the steering damper.
most of the body parts kit is now done...
most of the body parts kit is now done...
craig@STW- Number of posts : 1410
Location : location Location
Registration date : 2010-05-06
Re: lyka kits 2,3,4 etc etc etc...
the control model "body" went together last week.
we will soon be at a stage where we can get the springs done and then we can mate the body to the chassis. it should start looking like a real lyka soon
both springs and body kit will be available this month (July)
we will soon be at a stage where we can get the springs done and then we can mate the body to the chassis. it should start looking like a real lyka soon
both springs and body kit will be available this month (July)
craig@STW- Number of posts : 1410
Location : location Location
Registration date : 2010-05-06
Re: lyka kits 2,3,4 etc etc etc...
the UK spring kits went out this week and the body parts (now kit 7) are ready to go but we seem to be at the bottom of the priority list for the box suppliers, i guess thats one of the down sides of ordering small quantities.
next kits will be the brake calipers and pipework and then the boilers, although im not sure now many kit "payments" the boilers involve.
next kits will be the brake calipers and pipework and then the boilers, although im not sure now many kit "payments" the boilers involve.
craig@STW- Number of posts : 1410
Location : location Location
Registration date : 2010-05-06
Similar topics
» next lyka kits
» Lyka Engine kits
» 4" Burrell Single Crank Compound Kits 1-5, plus kits 7 & 8. Reduced further Now Saving over £2250!! (NOW SOLD!)
» next lyka kit
» lykamobile
» Lyka Engine kits
» 4" Burrell Single Crank Compound Kits 1-5, plus kits 7 & 8. Reduced further Now Saving over £2250!! (NOW SOLD!)
» next lyka kit
» lykamobile
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
|
|