Hi thinking of doing one
3 posters
Page 1 of 1
Hi thinking of doing one
Hi am new am thinking of doing one of these kits when am back working What tools are needed to build please
Mark- Number of posts : 1
Location : Shropshire
Registration date : 2018-05-12
Re: Hi thinking of doing one
Hi Mark
And welcome aboard. As stated on the adverts. Basically hand tools only required. The following thread HERE Gives everything you need.
Only power tools possibly required. Electric hand drill and a angle grinder.
Also have a look in the Photo section as there are build threads etc.
And welcome aboard. As stated on the adverts. Basically hand tools only required. The following thread HERE Gives everything you need.
Only power tools possibly required. Electric hand drill and a angle grinder.
Also have a look in the Photo section as there are build threads etc.
lynnr- Number of posts : 3242
Age : 55
Location : Highland, 4inch showman
Registration date : 2010-08-06
Re: Hi thinking of doing one
Machining Centre & large Lathe are handy
LazySmurfer- Number of posts : 74
Age : 57
Location : Potton Bedfordshire
Registration date : 2016-10-21
Similar topics
» Lynn Robinson. Showman Scenic
» Thinking of 2014
» Thinking of getting an air compressor
» Thinking of buying a Lathe
» Thinking of buying a welder
» Thinking of 2014
» Thinking of getting an air compressor
» Thinking of buying a Lathe
» Thinking of buying a welder
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
|
|