just building up front wheel. help?

wheels is coming on awesome!

this may be a silly question but here goes...........  

reading through the instructions and looking at the drawings, there is nothing saying about the bronze bushes? do they go in the hub? cause there are two different lengths of bushes. but I cant see anything about them in the drawings or instructions?

do you have to wait until the front axle comes?

Hi Ross
I am another Scottish builder in Tarbert on West coast. You are looking for wheel assembly stage 4 in instructions.

oh quality! ive got my instructions beside me.

nothing about the bushes

do the go inside the hub? if they do ... my bushes are too big,

hmmmmmm

Kit 01 page 3 top part Stage 4 and ISO BU201 - they go in hub difference in length is so that gap between them is below the oiler.

what codes were your Bushes on your packing list?? AM141820? and AM141814

Yes

well I don't know.

on my instructions it page 3 assembly 4 all its mentioning is about fitting the end caps. nothing about bronze bushes, it doesn't mention en anywhere in my instructions.

the inside diameter of my hub is the same inside diameter of the of the bronze bush, so it will never fit, maybe they have sent me the wrong ones. ill phone tomorrow or maybe they don't need as its not in my instructions and drawings. ill find out tomorrow.

cheers mate

If i remember correctly, the bushes in my front and rears had to be fitted prior to fitting the hub covers on. They should be
fitted so that the gap between the bushes coincide with the oiler tube. Im guessing if yours dont fit, you have the wrong bushes.
Mike

yeah there the wrong ones.

ill get them swapped this week!

pheeeew!


thanks

here is the drawing in case your missing it , hope you have it sorted soon and enjoy your build