Draw bolt question
2 posters
Page 1 of 1
Draw bolt question
Guys
Having trouble with part number BU40313 draw bolt. It does not seem long enough. When the smokebox door is shut it will not engage with the draw bar. When looking down through the chimney base the draw bolt is only half way across the draw bar and nowhere near shutting. Any help would be appreciated.
Thanks
Having trouble with part number BU40313 draw bolt. It does not seem long enough. When the smokebox door is shut it will not engage with the draw bar. When looking down through the chimney base the draw bolt is only half way across the draw bar and nowhere near shutting. Any help would be appreciated.
Thanks
Tassie Tiger- Number of posts : 47
Age : 60
Location : Tasmania Australia
Registration date : 2012-01-01
Re: Draw bolt question
Have you slackened it off enough to allow the hooked leg to engage? The bolt thread is not very far out of the second key when the draw bolt is engaged.
Tim
Tim
Tim Watson- Number of posts : 585
Location : Herts
Registration date : 2008-07-02
draw bolt question
Thank's Tim, all ok now I had not assembled it in the correct order. I had assembled and tightened the handles on the bar first and then tried to close the door which of course did not work at all. Thank's again. Cheers Phil
Tassie Tiger- Number of posts : 47
Age : 60
Location : Tasmania Australia
Registration date : 2012-01-01
Similar topics
» Draw Bolt Help Please
» Lykamobile Series 2 Blog
» bolt mod for the diff
» Sealing around bolt holes
» Best way to hold rivet bolts
» Lykamobile Series 2 Blog
» bolt mod for the diff
» Sealing around bolt holes
» Best way to hold rivet bolts
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
|
|