BU41133 Regulator spring
2 posters
Page 1 of 1
BU41133 Regulator spring
Need some help with this one. the BU 41133 Reg spring does not get a mention in the instructions. Does it locate in behind the reg nut BU41118 in the hole or is it not needed?
Thanks
Phil
Thanks
Phil
Tassie Tiger- Number of posts : 47
Age : 60
Location : Tasmania Australia
Registration date : 2012-01-01
Regulater spring
The regulater spring locates in the little hole in the block that is grubscrewed onto the regulater rod. It is there to provide a little downward pressure until the steam pressure takes over. You will find that it slides really easily with no pressure but as you steam up & the pressure in the boiler increases the regulater becomes quite stiff due to the downward pressure from the steam.
Steve Traill- Number of posts : 800
Age : 67
Location : Illogan Redruth Cornwall
Registration date : 2008-06-29
regulator spring
Thank's Steve for your help.Phil
Tassie Tiger- Number of posts : 47
Age : 60
Location : Tasmania Australia
Registration date : 2012-01-01
Similar topics
» springs....
» spring keepers
» Spring keepers
» Road Loco - 'Blackbeard'
» Lynn Robinson 4" water bowser
» spring keepers
» Spring keepers
» Road Loco - 'Blackbeard'
» Lynn Robinson 4" water bowser
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum