Blcok motion drip tray
2 posters
Page 1 of 1
Blcok motion drip tray
Hi STW.
Tried to fit the motion drip tray last night. The threads in the block appear to be a bigger size than the bolts supplied with the tray.
The bolts just slide right in with out gripping so the thread size is significantly different.
Tried to fit the motion drip tray last night. The threads in the block appear to be a bigger size than the bolts supplied with the tray.
The bolts just slide right in with out gripping so the thread size is significantly different.
lynnr- Number of posts : 3242
Age : 55
Location : Highland, 4inch showman
Registration date : 2010-08-06
Re: Blcok motion drip tray
oops, possible mistake there then
if you had posted 10mins earlier i would have spotted it before i left work. remind me for Monday and i'll check it out.
cheers lynn
if you had posted 10mins earlier i would have spotted it before i left work. remind me for Monday and i'll check it out.
cheers lynn
craig@STW- Number of posts : 1410
Location : location Location
Registration date : 2010-05-06
Re: Blcok motion drip tray
yes, this seems to be a mistake that only affects the second batch of cylinders.
new fasteners will be sent to those who need them
new fasteners will be sent to those who need them
craig@STW- Number of posts : 1410
Location : location Location
Registration date : 2010-05-06
lynnr- Number of posts : 3242
Age : 55
Location : Highland, 4inch showman
Registration date : 2010-08-06
Similar topics
» Motion drip tray.
» Motion covers or not?
» Motion Guard bolts
» A question for Road Loco customers
» plating the motion
» Motion covers or not?
» Motion Guard bolts
» A question for Road Loco customers
» plating the motion
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
|
|