Third Steaming
3 posters
Page 1 of 1
Third Steaming
Lit the fire for the third time today!
The regulator problem has now been fully resolved and a firmer and slightly longer spring in the starter valve, seems to have done the trick. The Clack leak when water pump working also fixed and dry. I took off the governor too as that was leaking and added some more packing. Cylinder drains still dribbling at low pressure but on the whole much better. I'll see how these go, going forward.
Only a few minor leaking and adjustments, which have been done already.
I got to 180 with the safety's lifting and all seemed well. The injector even made an effort to work too.
Safetys blowing
fast tick over
And its first road trip!
I have a completed bowser and seat, but need to sort the draw bolt and sort some foot rests, before i go further afield!
All in all a successful morning. Steam and hydraulic tests for the club next!
The regulator problem has now been fully resolved and a firmer and slightly longer spring in the starter valve, seems to have done the trick. The Clack leak when water pump working also fixed and dry. I took off the governor too as that was leaking and added some more packing. Cylinder drains still dribbling at low pressure but on the whole much better. I'll see how these go, going forward.
Only a few minor leaking and adjustments, which have been done already.
I got to 180 with the safety's lifting and all seemed well. The injector even made an effort to work too.
Safetys blowing
fast tick over
And its first road trip!
I have a completed bowser and seat, but need to sort the draw bolt and sort some foot rests, before i go further afield!
All in all a successful morning. Steam and hydraulic tests for the club next!
andyfletch- Number of posts : 82
Location : Great Dunmow, Essex
Registration date : 2008-06-21
Mutleybob likes this post
Re: Third Steaming
Congratulation, Very well done! The minor leaks and issues will sort out in time..
Enjoy.
Elwood
Enjoy.
Elwood
elwood-59- Number of posts : 300
Location : Germany-NRW
Registration date : 2014-12-17
Re: Third Steaming
Hi
Well done and good progress.
Did I spy a leaky steam valve to the injector? Need that sorting as a hot injector will not pick up well at all.
Otherwise looking very good indeed.
Well done and good progress.
Did I spy a leaky steam valve to the injector? Need that sorting as a hot injector will not pick up well at all.
Otherwise looking very good indeed.
lynnr- Number of posts : 3242
Age : 55
Location : Highland, 4inch showman
Registration date : 2010-08-06
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
|
|