A trip to STW Towers

HI all
I went to STW and was given some good advice from Dean it was stop making barralls and get on with your engine .Thanks good motvashon and incurigmunt
Well now the new wood for my shead is all painted one coat and will last the winter .But I must do another coat soon.
After my trip to STW it was tools down for the shead and on with the engine .so I have some pics for you to see.

First big prob was. As I am a messy painter I had to clean out all my wheals done on the piller drill.
Next thing I had was that the pins did not fit at all in the cogs .I do not know if any one had this prob.
But it now is all ok.
All fitted up and put on to the four wheals now well chufted.

Next bit was fun I am putting in the rivets in the arm lever just had to find a hammer that was big enough??

There is just one thing can any one please tell me if I have done the spring the wright way round .This is what I have under stoodand is it the right spring.Well that is it for now I do hope to do some mroe tomorow.

Hugh

You have got the spring on according to the instructions

I put it on the other side though, this allowed me to put the bolts through from the outside, which looks better, and the spring then locks onto the thread that protrudes and trapped by the washer and nut that I did not do up very tight and crushed the thread at the end to stop it unwinding.

But, if it works then I can't see it will make any difference

Alan

Big Al wrote:Hugh

You have got the spring on according to the instructions

I put it on the other side though, this allowed me to put the bolts through from the outside, which looks better, and the spring then locks onto the thread that protrudes and trapped by the washer and nut that I did not do up very tight and crushed the thread at the end to stop it unwinding.

But, if it works then I can't see it will make any difference

Alan

HI Alan Thanks for this at first I had it allthe wrog way round ..But the spring is not so strong ...I do have some more .. Thanks

next time you guys are at the factory feel free to come and have a nose around the machine shop. we are more than happy if you want to distract us from our work for a bit

Craig

miller wrote:next time you guys are at the factory feel free to come and have a nose around the machine shop. we are more than happy if you want to distract us from our work for a bit

Craig

Hi Craig
Thanks I did meen to but we were out side drinking all the tea

MILLER, DON'T LET STEVE AND DEAN HERE YOU SAY THAT !!!

BUNGLE

Hy we can talk and I will set and push buttons I am trained now {but at what not known}

I'll just be there in a supervisory role ensuring work goes smoothly and the teas are made for everyone (note I didn't say I'd be making them )
Anything thats genuinely work related. poke right up ya a**e, I've a medical condition with work, I break out in cold sweats just thinking of it let alone doing it!!!

LilyJack

LilyJack wrote:I'll just be there in a supervisory role ensuring work goes smoothly and the teas are made for everyone (note I didn't say I'd be making them )

Dose this meen you make it with some bad things in it or just high Alc**%Vol ????

Nowt wrong with a good measure of whiskey in ya cuppa Hugb . At least ya can tell the missus "I've had 4 cuppas this mornin!!" and be honest about it eh hehe.

LilyJack

LilyJack wrote:Nowt wrong with a good measure of whiskey in ya cuppa Hugb . At least ya can tell the missus "I've had 4 cuppas this mornin!!" and be honest about it eh hehe.

LilyJack

It will make the milk go bad