painting inside tender
4 posters
Page 1 of 1
painting inside tender
has anyone painted inside there tender as all our isoflex has blistered up so having to remove it all , any help would be great .many thanks mick and Claire.
mick 100- Number of posts : 103
Location : sussex
Registration date : 2012-10-13
Re: painting inside tender
I used red lead in my loco tenders for 25 years without one problem but it is getting very hard to get and my last loco tender I used industrial red oxide paint and so far has been ok (now 5 years old )
I would pour the paint in and rotate the tender slowly and let the paint get into all the corners then pour out the excess and allow to dry for up to 7 days
mark
I would pour the paint in and rotate the tender slowly and let the paint get into all the corners then pour out the excess and allow to dry for up to 7 days
mark
Mark the spark- Number of posts : 389
Location : Edinburgh
Registration date : 2015-04-26
painting inside tender
thank you very much I will have to brush it on as our engine is up and running, have lost faith in isoflex many thanks mick and Claire .
mick 100- Number of posts : 103
Location : sussex
Registration date : 2012-10-13
Re: painting inside tender
You need to use a product called Apexior 3, it is made especially for inside of water tanks. Isoflex is not designed to be submerged in water for long periods. You can obtain Apexior products from heritage steam
Cheers Tim
Cheers Tim
TimV- Number of posts : 123
Location : Poole , Dorset
Registration date : 2014-10-09
painting inside tender
thank you tim I will get in touch with them sounds great .
mick 100- Number of posts : 103
Location : sussex
Registration date : 2012-10-13
Re: painting inside tender
mick 100 wrote:thank you tim I will get in touch with them sounds great .
Its not cheap, if you need to share the cost I could do with some as my tenders fairly unwell, although I'm not sure I'll be able to clean up my tender well enough for it now ??
LiveSteam- Number of posts : 778
Location : Hampshire
Registration date : 2013-09-08
painting inside tender
thank you I would have done but when I started to clean it out it was not a pretty sight so it's paint time .
mick 100- Number of posts : 103
Location : sussex
Registration date : 2012-10-13
Re: painting inside tender
No probs, I think mines the same to be honest, so it will have to make do for this season and painty time in the winter.
LiveSteam- Number of posts : 778
Location : Hampshire
Registration date : 2013-09-08
Similar topics
» Painting inside the hornplates
» Chimney and first bit of painting
» Tender and Tender Fittings put together in Duesseldor
» What way round are you doing it
» Coats of Paint
» Chimney and first bit of painting
» Tender and Tender Fittings put together in Duesseldor
» What way round are you doing it
» Coats of Paint
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
|
|