Front wheels
3 posters
Page 1 of 1
Front wheels
Started building my front wheels this afternoon, got to point where you have to put a rivet bolt in the centre hole and found that the rivet bolts are too long. Are there different length bolts for the back wheels? If so I may have been sent these by mistake. Any advice welcomed.
bazzer- Number of posts : 230
Age : 64
Location : Poole
Registration date : 2015-05-01
Re: Front wheels
I had to file all of mine flush with the nuts, used a power file which is an excellent tool for the build
MrStationHouse- Number of posts : 314
Location : Malmesbury
Registration date : 2011-04-26
Re: Front wheels
They are not just too long,the thread doesn't go down far enough to tighten the spokes to the rim
bazzer- Number of posts : 230
Age : 64
Location : Poole
Registration date : 2015-05-01
Re: Front wheels
Hi Barry,
I think that you will find that the rivit bolts are all the same length for the front and back wheels, sounds like your T rings are slightly to thin maybe as all the spokes are generally the same thickness.
Probably best to have a word with Steve at STW
Cheers Tim
I think that you will find that the rivit bolts are all the same length for the front and back wheels, sounds like your T rings are slightly to thin maybe as all the spokes are generally the same thickness.
Probably best to have a word with Steve at STW
Cheers Tim
TimV- Number of posts : 123
Location : Poole , Dorset
Registration date : 2014-10-09
Re: Front wheels
Thanks Tim.
bazzer- Number of posts : 230
Age : 64
Location : Poole
Registration date : 2015-05-01
Re: Front wheels
Emailed Steve, the rivet bolts were wrong size, he is sending me correct ones tomorrow.
That's good service.
That's good service.
bazzer- Number of posts : 230
Age : 64
Location : Poole
Registration date : 2015-05-01
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
|
|