2'' pictures
3 posters
Page 1 of 1
2'' pictures
Hi everyone
I have looked through a few threads but thought I would start a new one asking if anyone has pictures or videos of their engines that they could share please? Ideally completed or near completion.
I'm another ones that, although not new to the forum, I'm still thinking of starting my own build. 4'' would be ideal but funds lean toward starting smaller and ideally one day working up to 12'' scale.
So please help convince me! And perhaps a few pictures all in one place to look at might help others who would like to see what the finished engines will look like.
Thanks
Doug.
I have looked through a few threads but thought I would start a new one asking if anyone has pictures or videos of their engines that they could share please? Ideally completed or near completion.
I'm another ones that, although not new to the forum, I'm still thinking of starting my own build. 4'' would be ideal but funds lean toward starting smaller and ideally one day working up to 12'' scale.
So please help convince me! And perhaps a few pictures all in one place to look at might help others who would like to see what the finished engines will look like.
Thanks
Doug.
Doogle- Number of posts : 10
Location : Isle of Wight
Registration date : 2013-06-16
Re: 2'' pictures
Hi Doug,
Go to the owners photos section of the forum and look for Lynn Robinson photo series on the complete build of her 4" showman. Plus loads of other build photo series.
For videos go to Youtube and search for "steam traction world" there are a number that will pop up.
Ian
Go to the owners photos section of the forum and look for Lynn Robinson photo series on the complete build of her 4" showman. Plus loads of other build photo series.
For videos go to Youtube and search for "steam traction world" there are a number that will pop up.
Ian
IanL- Number of posts : 437
Age : 68
Location : Nottinghamshire
Registration date : 2011-07-25
Re: 2'' pictures
Thanks will have a look. Seen lots of pics of Lynn's fantastic engine already. Specifically looking for 2'' pics to get an idea of size. Plenty of videos of 4'' on YouTube too. 4'' is where I'd like to start but as said its probably a bit of a way off at the moment. I would like to see how the smaller engines compare and how practice they are.
Doogle- Number of posts : 10
Location : Isle of Wight
Registration date : 2013-06-16
Re: 2'' pictures
im sure there is a video on you tube of one of our customers doing his first steam of a 2inch at the old factory ???
craig@STW- Number of posts : 1410
Location : location Location
Registration date : 2010-05-06
Re: 2'' pictures
OK, not the video i was thinking of but...
craig@STW- Number of posts : 1410
Location : location Location
Registration date : 2010-05-06
Re: 2'' pictures
and...
and this is an old kit from Modelworks days, but its basically the same...
and this is an old kit from Modelworks days, but its basically the same...
craig@STW- Number of posts : 1410
Location : location Location
Registration date : 2010-05-06
Similar topics
» Bill's 6" Foden SWB Lorry
» Front roll
» Hard baked!
» Presedential Candidate??
» Lynn Robinson. Showman Scenic
» Front roll
» Hard baked!
» Presedential Candidate??
» Lynn Robinson. Showman Scenic
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
|
|