Gear Change
2 posters
Page 1 of 1
Gear Change
Has any one had any trouble with the second gear mechanism? The second gear is hard into the third gear carrier and you can't move the dog to be able to engage first gear. I could trim the dog, trim the gear arm or put the second gear on the lathe. Thoughts welcome
" />
" />
" />
" />
MrStationHouse- Number of posts : 314
Location : Malmesbury
Registration date : 2011-04-26
Re: Gear Change
Hi
You need to chamfer the inside of the 2nd gear at the splines. It is cut straight and the shaft has a stress release fillet.
that should let the second get in to its correct position.
You need to chamfer the inside of the 2nd gear at the splines. It is cut straight and the shaft has a stress release fillet.
that should let the second get in to its correct position.
lynnr- Number of posts : 3242
Age : 55
Location : Highland, 4inch showman
Registration date : 2010-08-06
Re: Gear Change
Cheers. Lynn
I knew someone would have solved it before me.
I knew someone would have solved it before me.
MrStationHouse- Number of posts : 314
Location : Malmesbury
Registration date : 2011-04-26
Re: Gear Change
Thanks Lynn, all sorted
" />
" />
" />
" />
" />
" />
" />
" />
" />
" />
MrStationHouse- Number of posts : 314
Location : Malmesbury
Registration date : 2011-04-26
Re: Gear Change
Excellent.
How posh. Msn with a lathe.
How posh. Msn with a lathe.
lynnr- Number of posts : 3242
Age : 55
Location : Highland, 4inch showman
Registration date : 2010-08-06
Re: Gear Change
Its an old Myford super 7. Really useful to have, but can't profess to be anything other than a novice.
Cheers
Simon
Cheers
Simon
MrStationHouse- Number of posts : 314
Location : Malmesbury
Registration date : 2011-04-26
Similar topics
» Frederick SRL(S)
» Flywheel and Gear change
» Road Loco - 'Blackbeard'
» Gear Change bracket
» Showmans Gear Change J-pegs
» Flywheel and Gear change
» Road Loco - 'Blackbeard'
» Gear Change bracket
» Showmans Gear Change J-pegs
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
|
|