Smokebox Center Name Ring
4 posters
Page 1 of 1
Smokebox Center Name Ring
Hi People,
I've painted the large brass name ring on the smokebox door red and picked out the brass letters as is common. What about the small brass name ring in the center, I've done a bit of surfing and the most popular seems to be red with picked out letters again or all black the same as the smokebox. Which is correct/original?
Thanks
Stewart
I've painted the large brass name ring on the smokebox door red and picked out the brass letters as is common. What about the small brass name ring in the center, I've done a bit of surfing and the most popular seems to be red with picked out letters again or all black the same as the smokebox. Which is correct/original?
Thanks
Stewart
Rosss- Number of posts : 24
Location : Central Scotland
Registration date : 2022-02-08
Re: Smokebox Center Name Ring
Hi Robfishman,
Thanks for the reply. I think I'll go with red.
Thanks for the reply. I think I'll go with red.
Rosss- Number of posts : 24
Location : Central Scotland
Registration date : 2022-02-08
Re: Smokebox Center Name Ring
Hi
On Crystal I did Red background and polished brass. But after a big hill climb at Mellor Brook both reds turned to a odd black.
On Crystal I did Red background and polished brass. But after a big hill climb at Mellor Brook both reds turned to a odd black.
_________________
Lynn
Technical Support
Steam Traction World Ltd
Re: Smokebox Center Name Ring
Hi,
for Pied Piper I also went the same way as Lynn, red with polished brass lettering. But I put some isolation between the door and baffle plate. After discussing with our chimney sweeper i opted for a „rope“like seal usually used to seal oven doors. So far no discoloring
for Pied Piper I also went the same way as Lynn, red with polished brass lettering. But I put some isolation between the door and baffle plate. After discussing with our chimney sweeper i opted for a „rope“like seal usually used to seal oven doors. So far no discoloring
elwood-59- Number of posts : 300
Location : Germany-NRW
Registration date : 2014-12-17
Similar topics
» chimney cap and base ring
» Kit 3 Smokebox
» Powder Coat Vs Spray Paint
» Piston Ring Gap
» piston ring end gap
» Kit 3 Smokebox
» Powder Coat Vs Spray Paint
» Piston Ring Gap
» piston ring end gap
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
|
|