2 inch burrell gear change mechanism
5 posters
Page 1 of 1
2 inch burrell gear change mechanism
the next part for the 2 inch burrel is the gear change mechanism...
some of the castings arrived with the governor bodies...
we have started with the main bracket so everything else can be checked for a good fit...
this is going to be another complicated kit
Craig
some of the castings arrived with the governor bodies...
we have started with the main bracket so everything else can be checked for a good fit...
this is going to be another complicated kit
Craig
miller- Number of posts : 270
Location : STW
Registration date : 2008-06-16
Re: 2 inch burrell gear change mechanism
Hi Thanks
For this But I still not got to my engine at the mo .But I have been reading the kits
good looking carstings
For this But I still not got to my engine at the mo .But I have been reading the kits
good looking carstings
hughb- Number of posts : 575
Age : 54
Location : hertfordshire
Registration date : 2009-03-13
Re: 2 inch burrell gear change mechanism
castings are looking great guys...but what about the diff and gears,they do seem to be way off schedule.
Tony
Tony
TonyT- Number of posts : 134
Age : 56
Location : Truro,Cornwall. (2" Burrell)
Registration date : 2008-06-17
Re: 2 inch burrell gear change mechanism
Hi Tony,
The diff and gear kit is just about ready. We have one drilling operation to do and then it can be despatched, so you'll be getting two kits this month.
Regards
Dean
The diff and gear kit is just about ready. We have one drilling operation to do and then it can be despatched, so you'll be getting two kits this month.
Regards
Dean
Re: 2 inch burrell gear change mechanism
Great news Dean,better see if there's any overtime at work!!!
TonyT- Number of posts : 134
Age : 56
Location : Truro,Cornwall. (2" Burrell)
Registration date : 2008-06-17
Re: 2 inch burrell gear change mechanism
Ok Can some one tell me what is going on ??????
Lost all the posts
Lost all the posts
hughb- Number of posts : 575
Age : 54
Location : hertfordshire
Registration date : 2009-03-13
Re: 2 inch burrell gear change mechanism
well we have made progress with this kit, in fact it's all but finished now. i think we are just waiting for the handles to be silver soldered on the main lever.
a few more pics for you...
this is the main bracket fitted to the control model, with the two "arm" castings in place
these arm castings were finished on the 4th axis CNC. by mounting them in a fixture in the chuck we could spin them the full 360 degrees and drill and tap all the holes in one go
and another small part , the bronze bush for the main lever...
and just to prove that the diff is coming on, a photo for you, we had to do a few unexpected operations to the castings when they arrived in the factory. i believe the last part, the cutting of the key-ways, is under way. don't forget, we have to do everything 100 times on the 2 inch, so it all takes time ...
craig
a few more pics for you...
this is the main bracket fitted to the control model, with the two "arm" castings in place
these arm castings were finished on the 4th axis CNC. by mounting them in a fixture in the chuck we could spin them the full 360 degrees and drill and tap all the holes in one go
and another small part , the bronze bush for the main lever...
and just to prove that the diff is coming on, a photo for you, we had to do a few unexpected operations to the castings when they arrived in the factory. i believe the last part, the cutting of the key-ways, is under way. don't forget, we have to do everything 100 times on the 2 inch, so it all takes time ...
craig
miller- Number of posts : 270
Location : STW
Registration date : 2008-06-16
Re: 2 inch burrell gear change mechanism
Nice looking job there Miller.. I'm going to assume that it was you who were buggering about with the gear change parts when Hugh and I were sodding about around the 2" the other day. Don't need to panic about getting the kits you're mentioning ready just yet as I've a fair way to go yet so everyone can wait for ME!!!!
Regards
LilyJack
Regards
LilyJack
LilyJack- Number of posts : 236
Location : UK
Registration date : 2009-04-01
Re: 2 inch burrell gear change mechanism
yep, that was me
miller- Number of posts : 270
Location : STW
Registration date : 2008-06-16
Similar topics
» Steam pipe from the Injector to the righthand Globe Valve
» Flywheel and Gear change
» Showmans Gear Change J-pegs
» Frederick SRL(S)
» Gear Change bracket
» Flywheel and Gear change
» Showmans Gear Change J-pegs
» Frederick SRL(S)
» Gear Change bracket
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum