Name plate
3 posters
Page 1 of 1
Name plate
Hi all , thinking ahead ide like to fit a name plate on my 4” agricultural, can anyone suggest a size I would need & who makes them? Thanks :-)
Mutleybob- Number of posts : 9
Location : Devon
Registration date : 2021-02-21
Name Plate
It was five years ago when I got my name plate made, but am very pleased with the result.
I used David Fieldhouse at www.nameplates.wix.com/name-plates
He was around half the cost of his competition and at that time was offering money back guarantee if you're not satisfied.
I opted for a 192mm x 25mm plate with raised lettering and mounted it on the door of the tool box of my STW Agricultural.
Regards
Chris
I used David Fieldhouse at www.nameplates.wix.com/name-plates
He was around half the cost of his competition and at that time was offering money back guarantee if you're not satisfied.
I opted for a 192mm x 25mm plate with raised lettering and mounted it on the door of the tool box of my STW Agricultural.
Regards
Chris
hydro9- Number of posts : 40
Location : Hampshire
Registration date : 2015-04-20
Re: Name plate
Thanks Chris
Mutleybob- Number of posts : 9
Location : Devon
Registration date : 2021-02-21
Name plate
Hi,
I had one made only a few weeks ago by Daine Carney loco.nameplates@uwclub.net, the length of the plate for 7 letters done to a suitable font was around 200mm x 25mm by 3mm thick, etched brass. Very nice, good sharp etches and her website shows suggestions on how to finish it. £95 for my design. I fixed mine to the walk board in line with the tool box but to the rear (on the metal strip) if that makes sense.
Good luck.
Richard.
I had one made only a few weeks ago by Daine Carney loco.nameplates@uwclub.net, the length of the plate for 7 letters done to a suitable font was around 200mm x 25mm by 3mm thick, etched brass. Very nice, good sharp etches and her website shows suggestions on how to finish it. £95 for my design. I fixed mine to the walk board in line with the tool box but to the rear (on the metal strip) if that makes sense.
Good luck.
Richard.
T140- Number of posts : 66
Location : Bristol
Registration date : 2014-05-10
Re: Name plate
Thanks Richard
Mutleybob- Number of posts : 9
Location : Devon
Registration date : 2021-02-21
Similar topics
» Bill's 6" Foden SWB Lorry
» Mr Station House Progress
» Lynn Robinson. Showman Scenic
» Etched Name Plate ?
» tender plate
» Mr Station House Progress
» Lynn Robinson. Showman Scenic
» Etched Name Plate ?
» tender plate
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
|
|