Name plaque for chimney
3 posters
Page 1 of 1
Name plaque for chimney
Good Morning
Please could somebody recommend a company to produce a brass name plate for my 4" scale Agricultural DCC Thanks
Please could somebody recommend a company to produce a brass name plate for my 4" scale Agricultural DCC Thanks
Stevegrapes- Number of posts : 3
Location : Norwich
Registration date : 2018-03-30
Re: Name plaque for chimney
Hi Steve,
I‘ve got mine from http://www.steamplates.co.uk/ Steve was very helpful and together we found a design and layout I was absolutely happy with. Between finalizing design and having it on my doorstep took about a week, mind you extra time to send from England to Germany took extra time.
Hope this helps
Cheers
Elwood
PS just noticed you look for a sign for a chimney, not for the side ... sorry - still I think Steve can also help you with that.
I‘ve got mine from http://www.steamplates.co.uk/ Steve was very helpful and together we found a design and layout I was absolutely happy with. Between finalizing design and having it on my doorstep took about a week, mind you extra time to send from England to Germany took extra time.
Hope this helps
Cheers
Elwood
PS just noticed you look for a sign for a chimney, not for the side ... sorry - still I think Steve can also help you with that.
Last edited by elwood-59 on Fri 05 Feb 2021, 11:38 am; edited 2 times in total (Reason for editing : additional info & typo correction)
elwood-59- Number of posts : 300
Location : Germany-NRW
Registration date : 2014-12-17
Name plaque for chimney
Hi Elwood,
Very much appreciated i shall contact them.
Very much appreciated i shall contact them.
Stevegrapes- Number of posts : 3
Location : Norwich
Registration date : 2018-03-30
knokinonabit likes this post
Steamplates
I have had several name plates off Steve Sparrow at Steamplates, plus registration plates, and have been very happy with the service and quality.
My name and number plates were all made to fit on chimney mounts, so you will have no problems with that.
My name and number plates were all made to fit on chimney mounts, so you will have no problems with that.
knokinonabit- Number of posts : 1
Age : 73
Location : Stokesley, North Yorkshire
Registration date : 2019-06-04
Steam plates
Thank you for the information just sent them a message
Stevegrapes- Number of posts : 3
Location : Norwich
Registration date : 2018-03-30
knokinonabit likes this post
Similar topics
» New Chimney for the Burrell
» Kit 3 advice
» Chimney kit
» Chimney and first bit of painting
» Chimney Modification
» Kit 3 advice
» Chimney kit
» Chimney and first bit of painting
» Chimney Modification
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
|
|