Water Pump Pipes

I have a small but irritating problem.
Of the two pipes provided, the WP Feed Pipe and the WP Bypass Pipe, one is too long and one too short.
Before I start cutting and soldering, am I missing something?
It would seem the pipes should be roughly the same length, about 90 cm. What I have are 87 and 97 cm. Even with an S bend the long one is too long to fit.
Any ideas please?

I had exactly the same issue. I contacted Steve at STW, he asked me for the measurements required and sent me new pipes.
Mike

Thanks Mike, that solves the problem.
As I live in Florida, I'll try my soldering and not trouble the hard working STW boys.
Peter

Best of luck Peter, I hppe it all gors well.
Mike

Hi

The gap between the threaded flanges is 90mm for both water pipes.

mariserve if you let me know. I can get new pipes sent.

Hi mariserve

I have picked and packed replacement pipes. The will go out on the next parcel uplift.

Great service, thanks Lynn.

Peter