2" Burrell Kit 4

Bonjour, Hello and how's you all doing. Apologies for not being on much and/or reading/leaving messages. As some may remember, It's been a mad 2 or 3 months of exam after exam (all of which seem to have been well worth the effort), anyways thats enough twoddle. I wish to collect KIT 4 and possibly 5 as long as work haven't cocked up any overtime owed.. If it's okay I will collect on Friday afternoon of this week (the 26th June) I believe?

I STILL haven't gotten around to lining my front wheels as I'm dreading making a proper cack-arsed job of it so any suggestions from you guys n gals would be SERIOUSLY appreciated...

Anyhoodles thats me for now, beer calls after a hard days exams so will be too pi**ed to reply to owt this evening. I trust everyone is well and Bungle, your hands pretty much mended now and can "shake-ya-mate" at full pelt once again

Take it easy

Best regards

LilyJack

LILYJACK, THANKS FOR YOUR BEST WISHES REGARDING MY HAND, ALL HEALED ON THE OUTSIDE NOW, BUT SOME LOSS OF FEELING AT THE MOMENT, WHICH I'M TOLD MAY,OR MAY NOT COME BACK. ONLY TIME WILL TELL. SO SHAKING ME MATE ALL GOOD !!

BUNGLE

Bungle,

Dont shake your "mate" to much or you'll be having trouble with the o'll eyesight

SORRY VAPOR, I COULDN'T READ THAT LAST POST !!!!!!!!!!!!

BUNGLE

I forgot to say it also affects hearing so could you please repeat your last quastion

Oh and it also looks like spelling, so I guess many on this forum suffer from this pastime

Hi Lilyjack

I done my lining on the wheels by building paint up in layers.Firstly I painted my wheels with white primer,then I painted the spokes yellow on both sides.Then it got fiddley for me because I put a strip of masking tape up the middle of each spoke,3mm for the fronts and 4mm for the rears.Once happy with this,I then sprayed red onto the spokes,and then went through the whole process again with masking tape,this time 5mm strip of tape for the fronts and 6mm on the rears.I then painted the whole wheel brown,followed by a clear coat to try to protect the lining.I personaly haven't bother with turning the red lines out as this proved far to fiddley for me.

Hope this helps.

Bungle glad to SEE (or not!) normal service has been resumed

cheer's Tony[i]

sounds great

Do you have any photos of your wheels now you have lined them

Baggycanoe

THANKS FOR YOUR KIND WORDS TONY. MY GUIDE DOG JUST READ THEM TO ME !

BUNGLE

Hi Baggycanoe

have a look in 2" owners photo's and you will find a few pics of the engine,and also in 2" kit 20 (i think)

you could send me a PM with your email and I could send some that way

cheer's Tony

Hi guys
Well I have been off a bit but now got a bit of time just for you guys ... { well to look about and post }
Lillyjack good luck with the build .....
I am glad to here that BUNGLE's hand is on the mend...As for mine not good at the mo .
Here is a pic of my wheel but TonyT is much better

Good luck with one and all

Hugh,you are my new best friend

cheer's Tony

TonyT wrote:Hugh,you are my new best friend

cheer's Tony

OK just why is that is it MY roof you going to help {snigger }

TONY,YOU ARE SOOOOOO EASIERLY BOUGHT, YOU TART

BUNGLE

BUNGLE wrote:TONY,YOU ARE SOOOOOO EASIERLY BOUGHT, YOU TART

BUNGLE

Definitely going down the road of masking tape, going to do a wide run of yellow and then once thats dried, go down the centre with a single black line. No bloody way am I doing it free hand,you've got to be sober to paint free-hand. Cheers for the advice there lads

Best regards

LilyJack