2" Burrell "On The Belt?"
4 posters
Page 1 of 1
2" Burrell "On The Belt?"
As I come towards the end of my build, I am looking of different ways to display my engine when finished. Has anyone here run there 2" On the belt to say, a small sawbench? I saw a 2" Fowler A7 at the Basingstoke rally driving a small bench, and have also seen a 2" Burrell road loco on a 12V Genny..
Any thoughts?
Will
Any thoughts?
Will
made-in-england- Number of posts : 17
Location : Stockbridge, Hampshire
Registration date : 2012-07-17
2" belted up
There's no reason why not, obviously the governer won't work but other than that they are powerfull little engines & would easily work a scale appliance
Steve Traill- Number of posts : 800
Age : 67
Location : Illogan Redruth Cornwall
Registration date : 2008-06-29
Re: 2" Burrell "On The Belt?"
Take it from me, the 2" Burrell is a powerful little engine. Ours will pull 2 wagons with me and the wife on board with ease. I have often thought about how I could put the engine to use on the rally field instead of just sitting there and ticking over. We have been offered the chance of looking at a 2" thrashing machine which we are planning to have a look at on our way back from Dorset this year and put the engine and machine together. I will let you know how we get on and how well the engine runs when working.
Tony
Tony
TonyT- Number of posts : 134
Age : 56
Location : Truro,Cornwall. (2" Burrell)
Registration date : 2008-06-17
Re: 2" Burrell "On The Belt?"
As promised, a report on how our 2" engine got on with the thrashing machine. The machine itself is a fully working miniature of a Ransomes thrashing machine which was built from an article in Model Engineering a few years ago. As for the running of the machine, the engine had no issues at all, in fact I had to hold the engine speed back to keep everything realistic. Anyway, a price was agreed and we should have a thrashing machine to play with next year.
Tony
Tony
TonyT- Number of posts : 134
Age : 56
Location : Truro,Cornwall. (2" Burrell)
Registration date : 2008-06-17
Re: 2" Burrell "On The Belt?"
Nice one, look forward to seeing it in action.
Steve Traill- Number of posts : 800
Age : 67
Location : Illogan Redruth Cornwall
Registration date : 2008-06-29
Re: 2" Burrell "On The Belt?"
Great to meet you a Dorset, lets see a picture of your new accessory
cheers
Steve
cheers
Steve
Steve H- Number of posts : 189
Location : Wellingborough,Northants
Registration date : 2014-03-07
Similar topics
» Burrell running a belt
» Governor Belt
» 2" belt driven implements
» Make sure your bolts are tight!
» Clearance to fit the dynamo belt ( or lack of it)
» Governor Belt
» 2" belt driven implements
» Make sure your bolts are tight!
» Clearance to fit the dynamo belt ( or lack of it)
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
|
|