back wheels
3 posters
Page 1 of 1
back wheels
hi all just finshed shed so starting to build againe just wondering wich apoxy or glue to use on back wheel spokes as must be quite slow thanks richard
Richard- Number of posts : 105
Location : sway hampshire
Registration date : 2011-09-08
Re: back wheels
I used Araldite Precision (the two part Syringe Dispenser type). I used almost one whole one on the two fronts and about 1.5 for both the rears. It works quite well but mixed it up a bit at a time. Think we had about 20 min working time but would depend on the temp etc.
Re: back wheels
Oh and one tip, make sure you use plenty so it squeezes out when you tighten up the covers. My second wheel could have done with a bit more and I ended up filling gaps between the spokes and hub cover on some using a cocktail stick and filler before painting. Far easier to clean off any afterwards than fill gaps.
Re: back wheels
You can also get the two hour epoxy. I used it and mixed larger batches without any problem.
lynnr- Number of posts : 3242
Age : 55
Location : Highland, 4inch showman
Registration date : 2010-08-06
Re: back wheels
THANKS FOR IMFO
Richard- Number of posts : 105
Location : sway hampshire
Registration date : 2011-09-08
Similar topics
» Thetford Works (Cornwall)
» Back to Wheels
» Frederick SRL(S)
» Getting Back To Business
» How about a Model G to follow the Lykamobile
» Back to Wheels
» Frederick SRL(S)
» Getting Back To Business
» How about a Model G to follow the Lykamobile
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
|
|