Tools needed for Kit 01 of the Foden.
2 posters
Page 1 of 1
Tools needed for Kit 01 of the Foden.
Adam asked about the tools required for the first kit.
The control models are now together for both the SWB and the C Type. Just waiting for the last item for the C Type.
Craig will hopefully post a couple of photos soon.
Tools used during construction of Kit 1:
4” angle grinder with flap wheel
Linisher, but could have used the file and/or angle grinder
Hole deburrer
Club hammer
Smooth flat file
Dremmel mini drill with drum sander
13mm spanner & socket
17mm spanner & socket
19mm spanner & socket
A couple of £1 coins for the swear box
Hope this helps. The kit should be dispatched Thursday, so just in time for the weekend. I’ll put a letter in with the kit which will cover the contents of the next few kits whilst we’re waiting for patterns to be made.
Regards
Steve
The control models are now together for both the SWB and the C Type. Just waiting for the last item for the C Type.
Craig will hopefully post a couple of photos soon.
Tools used during construction of Kit 1:
4” angle grinder with flap wheel
Linisher, but could have used the file and/or angle grinder
Hole deburrer
Club hammer
Smooth flat file
Dremmel mini drill with drum sander
13mm spanner & socket
17mm spanner & socket
19mm spanner & socket
A couple of £1 coins for the swear box
Hope this helps. The kit should be dispatched Thursday, so just in time for the weekend. I’ll put a letter in with the kit which will cover the contents of the next few kits whilst we’re waiting for patterns to be made.
Regards
Steve
Re: Tools needed for Kit 01 of the Foden.
Thanks Steve, looking forward to getting started
Adam Brown- Number of posts : 62
Location : Cambridge
Registration date : 2012-02-07
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
|
|