foden 6inch rear axle boxes...
2 posters
Page 1 of 1
foden 6inch rear axle boxes...
just a quick look at what we are doing at the moment... the rear Axel boxes.
once again another big casting kit. thankfully these are a little easier to work on
the main "top" castings on the CNC...
steady progress...
loads to do...
these are the "bottom" castings...
today we started bolting them together so we can cut the bearing holes...
top cap castings...
rear brake drums are also in this kit...
the control models...
once again another big casting kit. thankfully these are a little easier to work on
the main "top" castings on the CNC...
steady progress...
loads to do...
these are the "bottom" castings...
today we started bolting them together so we can cut the bearing holes...
top cap castings...
rear brake drums are also in this kit...
the control models...
craig@STW- Number of posts : 1410
Location : location Location
Registration date : 2010-05-06
Re: foden 6inch rear axle boxes...
Looking good
Is there a estimated finish date? Not that I need any more bits to paint at the minute
Is there a estimated finish date? Not that I need any more bits to paint at the minute
iain- Number of posts : 172
Location : Lincoln
Registration date : 2012-09-11
Similar topics
» Foden Rear Axle Box Warning
» next foden kit sneak preview...
» Bill's 6" Foden SWB Lorry
» rear axle box kit...
» Rear Axle fitting
» next foden kit sneak preview...
» Bill's 6" Foden SWB Lorry
» rear axle box kit...
» Rear Axle fitting
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
|
|