Steam Traction World
Would you like to react to this message? Create an account in a few clicks or log in to continue.

kit26 9/16 x 26 lock nuts ????

Go down

kit26 9/16 x 26 lock nuts ???? Empty kit26 9/16 x 26 lock nuts ????

Post  craig@STW on Tue 03 Jan 2012, 8:27 am

we have had reports from a couple of people that the 9/16 x 26 lock nuts (SP59008) were missing from kit 26 !!!

yes, they are not on the packing list BUT mike assures me they were in the kit and we have a sheet of "part number stickers" with half of them missing.

can you all please check to see if you have them

craig Cool
craig@STW
craig@STW

Number of posts : 1410
Location : location Location
Registration date : 2010-05-06

Back to top Go down

kit26 9/16 x 26 lock nuts ???? Empty Re: kit26 9/16 x 26 lock nuts ????

Post  lynnr on Tue 03 Jan 2012, 8:31 am

craig@STW wrote:we have had reports from a couple of people that the 9/16 x 26 lock nuts (SP59008) were missing from kit 26 !!!

yes, they are not on the packing list BUT mike assures me they were in the kit and we have a sheet of "part number stickers" with half of them missing.

can you all please check to see if you have them

craig Cool

Hi Craig. No unidentified packages here. All other items in box have been used and or accountied for use. Nuts are definately missing as stated on the 24th.
lynnr
lynnr

Number of posts : 3145
Age : 52
Location : Highland, 4inch showman
Registration date : 2010-08-06

Back to top Go down

kit26 9/16 x 26 lock nuts ???? Empty Re: kit26 9/16 x 26 lock nuts ????

Post  craig@STW on Tue 03 Jan 2012, 12:29 pm

yep OK, i think we have worked it out. you were sent 1 lock nut and you should have been sent 3 ???

we will sort this out and send you some more Cool
craig@STW
craig@STW

Number of posts : 1410
Location : location Location
Registration date : 2010-05-06

Back to top Go down

kit26 9/16 x 26 lock nuts ???? Empty Lock nuts!

Post  Tony King on Tue 03 Jan 2012, 4:08 pm

Hi Craig,
Just be aware that the lock nut which we did recieve is NOT the same size as the ones we need to lock up the sight glass bodies to the boiler connections....... I know you probably knew that, but just checking!!
Regards,
Tony

Tony King

Number of posts : 856
Age : 64
Location : scotland
Registration date : 2008-10-31

Back to top Go down

kit26 9/16 x 26 lock nuts ???? Empty The Brass Monkeys

Post  lynnr on Tue 03 Jan 2012, 4:15 pm

Hi All

I actually think it is the Brass Monkey that stole the brass nuts as it has been cold enough up here to freeze the balls off a brass monkey.
lynnr
lynnr

Number of posts : 3145
Age : 52
Location : Highland, 4inch showman
Registration date : 2010-08-06

Back to top Go down

kit26 9/16 x 26 lock nuts ???? Empty Where's me nuts??

Post  highpressure on Tue 03 Jan 2012, 5:23 pm

Hi Craig,

Just to confirm I dont have the lock nuts either. I take it they go on the thread that attaches the water gauge to the engine to lock up the unit on the boiler and top connector. I seem to have the nuts that hold the glass in the fittings.

Also can you confirm the threads of the water taps on the tender as I need to clean them out with a tap to get the fittings in. Also the threads for the blowdown valve ( 1/2" BSP? ) and the water tap on the bowser ( 3/4" BSP? ) as again I need to clean the threads out to get the fittings in.

Thanks Kev.
highpressure
highpressure

Number of posts : 1096
Age : 53
Location : West Sussex, 4" DCC Road Loco
Registration date : 2008-06-18

http://www.simplydigitalaerials.com

Back to top Go down

kit26 9/16 x 26 lock nuts ???? Empty Lock nuts

Post  Steve Traill on Tue 03 Jan 2012, 7:55 pm

Have checked my kit 26, I'm not at the stage of using it yet, and in the globe valve bag I have one 9.16 x 26 lock nut. Should there be more than one?
Steve Traill
Steve Traill

Number of posts : 779
Age : 63
Location : Illogan Redruth Cornwall
Registration date : 2008-06-29

Back to top Go down

kit26 9/16 x 26 lock nuts ???? Empty Re: kit26 9/16 x 26 lock nuts ????

Post  craig@STW on Tue 03 Jan 2012, 10:25 pm

one for the globe valve and two for the water gauge.

don't worry, it'll be sorted Cool
craig@STW
craig@STW

Number of posts : 1410
Location : location Location
Registration date : 2010-05-06

Back to top Go down

kit26 9/16 x 26 lock nuts ???? Empty Sorted

Post  Steve Traill on Fri 06 Jan 2012, 9:29 pm

Just received the two extra lock nuts, thanks Craig, problem sorted!

Excellent service cheers cheers cheers
Steve Traill
Steve Traill

Number of posts : 779
Age : 63
Location : Illogan Redruth Cornwall
Registration date : 2008-06-29

Back to top Go down

kit26 9/16 x 26 lock nuts ???? Empty Re: kit26 9/16 x 26 lock nuts ????

Post  Sponsored content


Sponsored content


Back to top Go down

Back to top


 
Permissions in this forum:
You cannot reply to topics in this forum