Project 4" (1/3 Full Size) Burrell Agricultural Traction Engine Build.

Page 1 of 3 1, 2, 3  Next

Go down

Project 4" (1/3 Full Size) Burrell Agricultural Traction Engine Build. Empty Project 4" (1/3 Full Size) Burrell Agricultural Traction Engine Build.

Post  LazySmurfer on Mon 21 Nov 2016, 7:53 pm

Project 4" (1/3 Full Size) Burrell Agricultural Traction Engine Build. 14713612

 Tuesday 25th Oct '16 - Unpacking kit 1 & checking contents.


Last edited by LazySmurfer on Mon 21 Nov 2016, 8:21 pm; edited 2 times in total
LazySmurfer
LazySmurfer

Number of posts : 74
Age : 53
Location : Potton Bedfordshire
Registration date : 2016-10-21

Back to top Go down

Project 4" (1/3 Full Size) Burrell Agricultural Traction Engine Build. Empty Re: Project 4" (1/3 Full Size) Burrell Agricultural Traction Engine Build.

Post  LazySmurfer on Mon 21 Nov 2016, 8:01 pm

Project 4" (1/3 Full Size) Burrell Agricultural Traction Engine Build. 14718812

Wednesday 26th Oct '16 - After a bit of de-burring, clearing out tapped holes & test assembly.


Last edited by LazySmurfer on Mon 21 Nov 2016, 8:13 pm; edited 2 times in total
LazySmurfer
LazySmurfer

Number of posts : 74
Age : 53
Location : Potton Bedfordshire
Registration date : 2016-10-21

Back to top Go down

Project 4" (1/3 Full Size) Burrell Agricultural Traction Engine Build. Empty Re: Project 4" (1/3 Full Size) Burrell Agricultural Traction Engine Build.

Post  LazySmurfer on Mon 21 Nov 2016, 8:06 pm

Project 4" (1/3 Full Size) Burrell Agricultural Traction Engine Build. 14595510

Friday 28th Oct '16 - One wheel after a bit of sanding.


Last edited by LazySmurfer on Mon 21 Nov 2016, 8:14 pm; edited 1 time in total
LazySmurfer
LazySmurfer

Number of posts : 74
Age : 53
Location : Potton Bedfordshire
Registration date : 2016-10-21

Back to top Go down

Project 4" (1/3 Full Size) Burrell Agricultural Traction Engine Build. Empty Re: Project 4" (1/3 Full Size) Burrell Agricultural Traction Engine Build.

Post  LazySmurfer on Mon 21 Nov 2016, 8:07 pm

Project 4" (1/3 Full Size) Burrell Agricultural Traction Engine Build. 14915610

Tuesday 1st Nov '16 - Spoke fetling.


Last edited by LazySmurfer on Mon 21 Nov 2016, 8:14 pm; edited 1 time in total
LazySmurfer
LazySmurfer

Number of posts : 74
Age : 53
Location : Potton Bedfordshire
Registration date : 2016-10-21

Back to top Go down

Project 4" (1/3 Full Size) Burrell Agricultural Traction Engine Build. Empty Re: Project 4" (1/3 Full Size) Burrell Agricultural Traction Engine Build.

Post  LazySmurfer on Mon 21 Nov 2016, 8:09 pm

Project 4" (1/3 Full Size) Burrell Agricultural Traction Engine Build. 14962710

Thursday 3rd Nov '16 - First trip to Craftmaster Paints today.


Last edited by LazySmurfer on Mon 21 Nov 2016, 8:15 pm; edited 1 time in total
LazySmurfer
LazySmurfer

Number of posts : 74
Age : 53
Location : Potton Bedfordshire
Registration date : 2016-10-21

Back to top Go down

Project 4" (1/3 Full Size) Burrell Agricultural Traction Engine Build. Empty Re: Project 4" (1/3 Full Size) Burrell Agricultural Traction Engine Build.

Post  LazySmurfer on Mon 21 Nov 2016, 8:10 pm

Project 4" (1/3 Full Size) Burrell Agricultural Traction Engine Build. 14993310

Friday 11th Nov '16 - Bushes in & Hub caps now fit. First time I have ever used my Dads old Myford lathe was tonight to skim up the hub caps on a Model Traction engine. I think he would have been happy seeing it put to that use.
LazySmurfer
LazySmurfer

Number of posts : 74
Age : 53
Location : Potton Bedfordshire
Registration date : 2016-10-21

Back to top Go down

Project 4" (1/3 Full Size) Burrell Agricultural Traction Engine Build. Empty Re: Project 4" (1/3 Full Size) Burrell Agricultural Traction Engine Build.

Post  parador on Mon 21 Nov 2016, 10:50 pm

Good pictures.

I guess you will be brush painting.

Regards
Martin

parador

Number of posts : 58
Registration date : 2008-07-02

Back to top Go down

Project 4" (1/3 Full Size) Burrell Agricultural Traction Engine Build. Empty Re: Project 4" (1/3 Full Size) Burrell Agricultural Traction Engine Build.

Post  LazySmurfer on Tue 22 Nov 2016, 8:47 pm

Project 4" (1/3 Full Size) Burrell Agricultural Traction Engine Build. Img_0610

Tuesday 22th Nov '16 - Unpacking kit 2 & checking contents.

Yes Martin going to have a go at brush painting, see how I get on.
LazySmurfer
LazySmurfer

Number of posts : 74
Age : 53
Location : Potton Bedfordshire
Registration date : 2016-10-21

Back to top Go down

Project 4" (1/3 Full Size) Burrell Agricultural Traction Engine Build. Empty Re: Project 4" (1/3 Full Size) Burrell Agricultural Traction Engine Build.

Post  Jim the Shovel on Wed 23 Nov 2016, 5:09 pm

Think you will be pleasantly surprised with the Craftmaster coach enamel.
You'll soon get the hang of it. Best thing is not to play with it. Don't pile it on but work reasonably quick.
Leave any runs and rub down later, rather than trying to brush them out as the paint is going off.
The Purdy brushes aren't cheap but well worth it having tried cheaper synthetic brushes.
Also using the brush mate extends the life of the brush.
The Craftmaster varnish is probably the best varnish I have ever used. It's great on wood.

Good luck, and enjoy the build.
Regards
Jim


Last edited by Jim the Shovel on Wed 23 Nov 2016, 9:49 pm; edited 1 time in total
Jim the Shovel
Jim the Shovel

Number of posts : 106
Location : Isle of Wight
Registration date : 2015-06-30

Back to top Go down

Project 4" (1/3 Full Size) Burrell Agricultural Traction Engine Build. Empty Re: Project 4" (1/3 Full Size) Burrell Agricultural Traction Engine Build.

Post  LiveSteam on Wed 23 Nov 2016, 7:09 pm

Cracking set of photos of a new build Agri. Looking forward to more and the build Cool

LiveSteam

Number of posts : 571
Location : Hampshire
Registration date : 2013-09-08

Back to top Go down

Project 4" (1/3 Full Size) Burrell Agricultural Traction Engine Build. Empty Re: Project 4" (1/3 Full Size) Burrell Agricultural Traction Engine Build.

Post  LazySmurfer on Fri 25 Nov 2016, 2:28 pm

Thank you Jim & Livesteam.

Axel 31mm thick + 2x bushes 3mm thick = 37mm . Gap in fork = 33mm. This doesn't add up Sad
LazySmurfer
LazySmurfer

Number of posts : 74
Age : 53
Location : Potton Bedfordshire
Registration date : 2016-10-21

Back to top Go down

Project 4" (1/3 Full Size) Burrell Agricultural Traction Engine Build. Empty Re: Project 4" (1/3 Full Size) Burrell Agricultural Traction Engine Build.

Post  LazySmurfer on Wed 30 Nov 2016, 6:58 pm

Looking better after machining 5 or 6mm off the Axel, needed more than hand tools to do this !Project 4" (1/3 Full Size) Burrell Agricultural Traction Engine Build. Img_0611
LazySmurfer
LazySmurfer

Number of posts : 74
Age : 53
Location : Potton Bedfordshire
Registration date : 2016-10-21

Back to top Go down

Project 4" (1/3 Full Size) Burrell Agricultural Traction Engine Build. Empty Re: Project 4" (1/3 Full Size) Burrell Agricultural Traction Engine Build.

Post  LazySmurfer on Wed 30 Nov 2016, 7:00 pm

Starting to fit together nowProject 4" (1/3 Full Size) Burrell Agricultural Traction Engine Build. Img_0612
LazySmurfer
LazySmurfer

Number of posts : 74
Age : 53
Location : Potton Bedfordshire
Registration date : 2016-10-21

Back to top Go down

Project 4" (1/3 Full Size) Burrell Agricultural Traction Engine Build. Empty Re: Project 4" (1/3 Full Size) Burrell Agricultural Traction Engine Build.

Post  LazySmurfer on Fri 02 Dec 2016, 11:52 am

Ok so far to get the wheels to fit/turn I have had to bore out the outer covers of the wheels by a good 1/2mm (glad I had not finished the wheels !), skimmed a bit off the length of the wheel retaining collars & put a flat on the wheel retaining pins Very Happy. Anyone else had to do the same ?
LazySmurfer
LazySmurfer

Number of posts : 74
Age : 53
Location : Potton Bedfordshire
Registration date : 2016-10-21

Back to top Go down

Project 4" (1/3 Full Size) Burrell Agricultural Traction Engine Build. Empty Re: Project 4" (1/3 Full Size) Burrell Agricultural Traction Engine Build.

Post  Mark the spark on Fri 02 Dec 2016, 1:55 pm

when I did my front axel I machined a grove in the axel for a "o" ring to seal the rear of the wheel to stop oil leaking out and made a gasket for the hubcap to stop oil leaking out the front
mark

Mark the spark

Number of posts : 314
Location : Edinburgh
Registration date : 2015-04-26

Back to top Go down

Project 4" (1/3 Full Size) Burrell Agricultural Traction Engine Build. Empty Re: Project 4" (1/3 Full Size) Burrell Agricultural Traction Engine Build.

Post  LazySmurfer on Fri 02 Dec 2016, 2:13 pm

Good idea Mark but I think I will fit grease nipples to the wheels.
LazySmurfer
LazySmurfer

Number of posts : 74
Age : 53
Location : Potton Bedfordshire
Registration date : 2016-10-21

Back to top Go down

Project 4" (1/3 Full Size) Burrell Agricultural Traction Engine Build. Empty Re: Project 4" (1/3 Full Size) Burrell Agricultural Traction Engine Build.

Post  LazySmurfer on Fri 02 Dec 2016, 8:04 pm

First bit of Primer went on today. Project 4" (1/3 Full Size) Burrell Agricultural Traction Engine Build. Img_0613
LazySmurfer
LazySmurfer

Number of posts : 74
Age : 53
Location : Potton Bedfordshire
Registration date : 2016-10-21

Back to top Go down

Project 4" (1/3 Full Size) Burrell Agricultural Traction Engine Build. Empty DCC front axle

Post  parador on Fri 02 Dec 2016, 11:11 pm

I'm also doing the axle kit but for a 4" DCC.  I notice that you have a bush for the axle pin which appears not to be the case with the DCC .  I wonder why as I would have thought that a pin straight through the axle was a point of wear.

Regards
Martin

parador

Number of posts : 58
Registration date : 2008-07-02

Back to top Go down

Project 4" (1/3 Full Size) Burrell Agricultural Traction Engine Build. Empty Re: Project 4" (1/3 Full Size) Burrell Agricultural Traction Engine Build.

Post  NorfolkModelSteam on Wed 07 Dec 2016, 9:51 pm

Thank you for sharing! Great to see your progress to date. I'm signed up for the 4" roller so keen to see how other people are working and looking forward to getting my first kit in the New Year.

NorfolkModelSteam

Number of posts : 94
Location : Downham Market
Registration date : 2015-10-15

Back to top Go down

Project 4" (1/3 Full Size) Burrell Agricultural Traction Engine Build. Empty Re: Project 4" (1/3 Full Size) Burrell Agricultural Traction Engine Build.

Post  LazySmurfer on Fri 09 Dec 2016, 7:44 pm

Friday 9th Dec '16 - Done the messy job I had been putting off today. Putting the wheels together with ARALDITE, Loctite & nuts n bolts. Still a LOT of work to do on them, but getting there. The undercoat is going on ok  Very Happy

The Roller does look good NorfolkModelSteam nearly went for that myself, looking forward to seeing your build Smile

Project 4" (1/3 Full Size) Burrell Agricultural Traction Engine Build. Img_0614
LazySmurfer
LazySmurfer

Number of posts : 74
Age : 53
Location : Potton Bedfordshire
Registration date : 2016-10-21

Back to top Go down

Project 4" (1/3 Full Size) Burrell Agricultural Traction Engine Build. Empty Re: Project 4" (1/3 Full Size) Burrell Agricultural Traction Engine Build.

Post  LazySmurfer on Tue 20 Dec 2016, 1:16 pm

Project 4" (1/3 Full Size) Burrell Agricultural Traction Engine Build. Img_0616

Tuesday 20th Dec '16 - WOW, unboxing kit No3. Smokebox & Chimney, loads of work!
LazySmurfer
LazySmurfer

Number of posts : 74
Age : 53
Location : Potton Bedfordshire
Registration date : 2016-10-21

Back to top Go down

Project 4" (1/3 Full Size) Burrell Agricultural Traction Engine Build. Empty Re: Project 4" (1/3 Full Size) Burrell Agricultural Traction Engine Build.

Post  bazzer on Tue 20 Dec 2016, 8:23 pm

Find some with small hands to fit the nuts halfway down the chimney!!!
bazzer
bazzer

Number of posts : 204
Age : 59
Location : Poole
Registration date : 2015-05-01

Back to top Go down

Project 4" (1/3 Full Size) Burrell Agricultural Traction Engine Build. Empty Re: Project 4" (1/3 Full Size) Burrell Agricultural Traction Engine Build.

Post  LazySmurfer on Fri 23 Dec 2016, 8:42 pm

Project 4" (1/3 Full Size) Burrell Agricultural Traction Engine Build. Img_0617
Have a smoking New Year
LazySmurfer
LazySmurfer

Number of posts : 74
Age : 53
Location : Potton Bedfordshire
Registration date : 2016-10-21

Back to top Go down

Project 4" (1/3 Full Size) Burrell Agricultural Traction Engine Build. Empty Re: Project 4" (1/3 Full Size) Burrell Agricultural Traction Engine Build.

Post  LazySmurfer on Tue 31 Jan 2017, 2:36 pm

Tuesday 31st Jan '17 - Kit 4. Unboxed, the beer was not included its to show the size.
Project 4" (1/3 Full Size) Burrell Agricultural Traction Engine Build. Img_0710
LazySmurfer
LazySmurfer

Number of posts : 74
Age : 53
Location : Potton Bedfordshire
Registration date : 2016-10-21

Back to top Go down

Project 4" (1/3 Full Size) Burrell Agricultural Traction Engine Build. Empty Re: Project 4" (1/3 Full Size) Burrell Agricultural Traction Engine Build.

Post  bazzer on Tue 31 Jan 2017, 4:13 pm

Now this the bit where things start to get heavy!!!
bazzer
bazzer

Number of posts : 204
Age : 59
Location : Poole
Registration date : 2015-05-01

Back to top Go down

Project 4" (1/3 Full Size) Burrell Agricultural Traction Engine Build. Empty Re: Project 4" (1/3 Full Size) Burrell Agricultural Traction Engine Build.

Post  Sponsored content


Sponsored content


Back to top Go down

Page 1 of 3 1, 2, 3  Next

Back to top

- Similar topics

 
Permissions in this forum:
You cannot reply to topics in this forum