Tyre pressures
4 posters
Page 1 of 1
Tyre pressures
What is the correct tyre pressures for the Lykamobile?
On the tyre is the maximum 42 PSI Cold.
Too hard will give a hard ride, too soft and you lose grip.
Does any one know what the correct working PSI should be?
On the tyre is the maximum 42 PSI Cold.
Too hard will give a hard ride, too soft and you lose grip.
Does any one know what the correct working PSI should be?
Re: Tyre pressures
Not a clue to the correct pressures but I have settled for 30psi front and 35psi rear. These seem a fair compromise over our very rough local roads.
I have now covered over a thousand miles and the tyres have given no problems.
Peter.
I have now covered over a thousand miles and the tyres have given no problems.
Peter.
augustrock- Number of posts : 29
Location : Andover Hampshire
Registration date : 2008-06-19
Re: Tyre pressures
There is a method for normal car tyres but I don't know how the Lika's tyres compare.
Draw a chalk line across the tyre, roll it across a flat surface. the chalk should be rubber off across 75% of the width if the tyre pressure is correct.
Draw a chalk line across the tyre, roll it across a flat surface. the chalk should be rubber off across 75% of the width if the tyre pressure is correct.
ejparrott- Number of posts : 118
Location : Rugby
Registration date : 2012-09-27
Re: Tyre pressures
Loaded, at least, I've always done it loaded!
ejparrott- Number of posts : 118
Location : Rugby
Registration date : 2012-09-27
Similar topics
» Tyre pressures
» tyre fitting?
» Tyre fitting.
» fitted front tyre's
» Vulcanised Tyres and Powder Coating
» tyre fitting?
» Tyre fitting.
» fitted front tyre's
» Vulcanised Tyres and Powder Coating
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
|
|